51115 CX Thrust Ball Bearings

B2:22.3 mm; D:110 mm; B:33.4 mm; Weight:1.2 kg; Recommended tightening torque for set screw:22 Nm; S:12 mm; C:24 mm; m:8 mm; d:60 mm; SW:5 mm;

H2:83 mm; T max.:100 °C; T min.:-40 °C; B:38.1 mm; Designation of housing:PG206N-; d:30 mm; C0:11.2 kN; L:85 mm; Z:52.3 mm; A:48 mm;

L3:51 mm; Recommended tightening torque for set screw:3.7 Nm; L2:10 mm; SW:3.18 mm; A:32 mm; L:94 mm; N:19mm; H2:51 mm; H1:76 mm; d:19.05 mm;

Expansion Type:Non-Expansion; End Cap Groove:Yes; Housing Type:2 Bolt Flange; Self Aligning:Self Centering; Base to Center Height:Not Applicable; Bearing Insert Material:Nickel-Coated Steel; Retainer Material:Polymer; Anti-Rotation Pin:Yes; Bearing Family:Setscrew Ball Bearin; Housing Coating:No Coating;

H2:83 mm; T max.:100 °C; T min.:-40 °C; B:38.1 mm; Designation of housing:PG206N-; d:30 mm; C0:11.2 kN; L:85 mm; Z:52.3 mm; A:48 mm;

J:116 mm; e:13 mm; d:28.58 mm; H:117 mm; s1:15 mm; A1:12 mm; C:19.5 kN; T min.:-20 °C; C0:11.2 kN; A:24 mm;

H2:83 mm; T max.:100 °C; T min.:-40 °C; B:38.1 mm; Designation of housing:PG206N-; d:30 mm; C0:11.2 kN; L:85 mm; Z:52.3 mm; A:48 mm;

Expansion Type:Non-Expansion; End Cap Groove:Yes; Housing Type:2 Bolt Flange; Self Aligning:Self Centering; Base to Center Height:Not Applicable; Bearing Insert Material:Nickel-Coated Steel; Retainer Material:Polymer; Anti-Rotation Pin:Yes; Bearing Family:Setscrew Ball Bearin; Housing Coating:No Coating;

da min:12 mm; Fatigue limit load, Cu:0.13 kN; Nlim:21,000 rpm; D1:22.5 mm; da max:13.9 mm; d:10 mm; Dynamic load, C:4.45 kN; rs min:0.3 mm; f0:12.4; Max operating temperature, Tmax:120 °C;

Designation of bearing:UK216G2H-44; T min.:-20 °C; B:44 mm; H1:30 mm; Weight:9.36 kg; C0:54.2 kN; Designation of housing:P216-; N1:31 mm; A:78 mm; d:69.85 mm;

Mass:0.0037 kg; Brand:NTN; ras max:0.3 mm; da min:8 mm; t:1 mm; Precision class:P0; B:10 mm; Lubrication hole on inner ring:Oui/Yes; d:6 mm; rs min:0.3 mm;

J:116 mm; e:13 mm; d:28.58 mm; H:117 mm; s1:15 mm; A1:12 mm; C:19.5 kN; T min.:-20 °C; C0:11.2 kN; A:24 mm;

H2:83 mm; T max.:100 °C; T min.:-40 °C; B:38.1 mm; Designation of housing:PG206N-; d:30 mm; C0:11.2 kN; L:85 mm; Z:52.3 mm; A:48 mm;

B:126 mm; S:51 mm; Recommended tightening torque for set screw:75 Nm; T max.:200 °C; e:65 mm; A1:48 mm; C:228 kN; J:430 mm; Designation of bearing:UC324G2T20; G:M10x1;

J:116 mm; e:13 mm; d:28.58 mm; H:117 mm; s1:15 mm; A1:12 mm; C:19.5 kN; T min.:-20 °C; C0:11.2 kN; A:24 mm;